 |
|
 |
HAWKER叉车电池的充电系统-霍克AGV智能充电站
霍克叉车蓄电池主要牵引力作用于物流设备上，以动力的形式驱动电瓶叉车，HAWKER电池充电的需求较高,不同波动的电流设计有一个非常严格的程序,避免无人值守，现在基本以智能识别电流、电压充电机，这种霍克叉车充电机系统采用单片机作为控制器，可以实现监控电压、温度、密度、电流变化，充电过程安装设计的充电曲线进行，非常适合霍克叉车电池能量补偿,尤其是在电池充满的情况下，可增加8%-10%的电流进行均衡充电，可延续电池寿命，循环电解液，平衡叉车电池活性物质的反应，特别是2年以后的电池更加适合。
Product Features
This product is designed for automatic guided / pure electric passenger / electric forklift applications. Products from the basic power module N + 1 parallel combination, the maximum to meet the 24V120A power applications. The machine adopts the controller specially developed for AGV car application demand, realize the function of logic control, system protection, parameter setting, charger management, upper communication and so on, and adopts 7-inch full color touch screen to realize human-computer interaction.
The system has the following features:
●DC output 24V60A and 48V50A modular power supply, support current expansion upgrade.
●hot-swap mode, N + 1 redundant structure protection
●ultra-high power density, compact size
●Standard efficiency up to 92%
●variety use mode (independent charge, interactive charge, maintenance charge)
●With industrial communication bus (CAN / MODBUS / PROFIBUS DP)
●High protection safety rating (IP54), designed for industrial applications
This product is designed for automatic guided vehicles / electric forklifts and other applications. Products from the basic power module N + 1 parallel combination, the maximum to meet the 24V240A / 48V200A power applications. The machine adopts the controller specially designed for the AGV trolley application for the automatic production line. It realizes the functions of logic control, system protection, parameter setting, charger management, upper communication and so on, and adopts 7-inch full color touch screen to realize human-computer interaction.
The system has the following features:
●Ultra-high power, 240A @ 24V / 200A @ 48V
●hot-swap mode, N + 1 redundant structure protection
●ultra-high power density, compact size
●support current expansion upgrade
●Standard efficiency up to 92%
●Variety use mode (fast charge, interactive charge, balanced charge, maintenance charge)
●provide IO port for system interlock protection
●With industrial communication bus (CAN / MODBUS / PROFIBUS DP)
●High protection safety rating (IP54), designed for industrial applications
Product specifications
Voltage level
24Vsystem
48Vsystem
model
LPC120-24
LPC180-24
LPC240-24
LPC100-48
LPC150-48
LPC200-48
power
3600W
5400W
7200W
6000W
9000W
12000W
recharging current
5~120A
5~180A
5~240A
5~100A
5~150A
5~200A
Input voltage
220VAC±10%，50/60Hz(Optional 380VAC±10%)
Power factor
≥0.99@220Vac/50A, ≥0.98@220Vac/25A(Single module)
Dynamic adjustment rate
±5.0% for 10-90% or 90-10% Load change,Adjust the time < 200us
Load Regulation
±0.5% from 10% to 100% load
Charging voltage
16～30VDC
43～58VDC
Steady flow accuracy
≦±0.5%
Noise voltage
< 200 mV Peak peak, 30 MHz bandwidth, < 2 mV rms Telephone weight
Regulation accuracy
≦±0.5%
Time accuracy
≦±10S/24h
Charging parameter settings
Voltage
0.01V
Current
0.1A
time
1S
Dimensions
According to power
weight
According to power
Operating temperature
0℃~45℃
Storage temperatur
-10℃~40℃
Working humidity
Relative humidity 10%~80%，No condensation
protection
Overcurrent, overvoltage, overtemperature, reverse, missing, short circuit, cut off
communication
CAN/MODBUS/PROFIBUS DPOptional
InteractionDIO
Dry contactDIO, Battery contact informs, standby, charging, charging is complete, faulty
safety standard
IEC 60950-1
Electromagnetic compatibility standards
EN 61000-6
environment
ETSI EN 300 019-2 RoHS compliant
Insulation and pressure
3.0 KVAC –Input pair output 1.5 KVAC –Input to ground 0.5 KVDC –Output to ground
Average trouble-free working hours
5Million hours
noise
50DB
LPC120-24 charging station dimensions:
LPC120-24 above specifications charging station Dimensions:
The charging station uses floor-mounted foot installation mode.
